Free online test

Multi-Touch Test

Count simultaneous browser touch contacts and compare them with navigator.maxTouchPoints.

Reviewed by Last reviewed 2026-08-27Testing methodology

Private by design. Pointer positions, clicks and touch trails stay in this browser and are not transmitted.
Multi-Touch Test workbench Ready — nothing is being saved
Touch events0
Position—
Active contacts—
Maximum / pressure—

Touch and drag inside this surface. Scrolling is disabled only here.

Quick answer

What Multi-Touch Test tells you

Count simultaneous browser touch contacts and compare them with navigator.maxTouchPoints.

Observed here
Simultaneous contacts, Maximum observed contacts, Browser-reported maximum.
How to interpret it
The concurrent contact count includes touch pointers delivered to this surface. Browser gestures and operating-system limits can make it lower than a panel advertised contact count.
Important limit
Results reflect events and values exposed by this browser.
Data handling
Pointer positions, clicks and touch trails stay in this browser and are not transmitted.

Useful next comparison: Add contacts gradually inside the surface, fully release between attempts and compare the same combination in another application.

Understanding the result

What a result means

Maximum observed contacts are counted from simultaneous pointers and compared with navigator.maxTouchPoints. Reserved gestures can keep the observed count below the reported maximum without indicating a failed touch sensor.

Confirm the pattern by repeating simultaneous contacts. Results reflect events and values exposed by this browser.

How to use this test

  1. Read the privacy and compatibility notes.
  2. Start the test and interact only inside the marked test area.
  3. Repeat the action several times and compare the live indicators.
  4. Use the troubleshooting section before deciding that hardware is faulty.

What this test checks

  • Simultaneous contacts
  • Maximum observed contacts
  • Browser-reported maximum
  • Per-contact markers

What this test cannot check

Results reflect events and values exposed by this browser.

This test does not certify hardware or replace professional inspection.

System gestures may reserve some multi-finger combinations.

Device Test Bench provides browser-based diagnostic information for reference. It does not replace professional hardware inspection or repair.

Common problems and troubleshooting

Add fingers one at a time inside the surface, keep them stationary briefly and try another orientation. Disable browser zoom gestures only through normal device settings; do not force or press hard on the display.

  1. Repeat the same observation. Focus the test surface and repeat “Simultaneous contacts” three times under the same conditions.
  2. Change one condition. Compare “Maximum observed contacts” after changing only the relevant port, connection, browser setting or application.
  3. Rule out focus or interception. Close overlays and reserved shortcuts, keep the page visible and confirm that the live indicator changes during the action.
  4. Keep the result within its limit. Results reflect events and values exposed by this browser.

If the same pattern remains across relevant applications and connections, give the manufacturer or a qualified technician the repeatable observations instead of a guessed fault label.

Browser compatibility

Multi-pointer delivery is supported on modern touch browsers, but system gestures and browser chrome reserve some combinations. Desktop emulation does not prove real hardware multi-touch capacity.

BrowserReference statusEvidence basisVersionNotesChecked
ChromeSupportedExpected baselineNot recordedFeature detection is authoritative; permissions, platform and device support can change availability.2026-08-27
Microsoft EdgeSupportedExpected baselineNot recordedFeature detection is authoritative; permissions, platform and device support can change availability.2026-08-27
FirefoxPartialExpected baselineNot recordedFeature detection is authoritative; permissions, platform and device support can change availability.2026-08-27
SafariPartialExpected baselineNot recordedFeature detection is authoritative; permissions, platform and device support can change availability.2026-08-27

“Expected baseline” is an editorial capability expectation, not a completed browser test. The live feature check above is authoritative for this browser and device.

Privacy information

Pointer positions, clicks and touch trails stay in this browser and are not transmitted.

The public analytics allowlist does not accept pressed keys, typed text, pointer coordinates, media labels, device IDs, recordings, video frames or controller input. Test results are not written to LocalStorage.

Primary technical references

These specifications define the browser signals used by this test. They document web-platform behavior; they do not certify a particular device.

Frequently asked questions

Is this Multi-Touch Test free?

Yes. The test works without an account, download or payment.

Is my test data uploaded?

Pointer positions, clicks and touch trails stay in this browser and are not transmitted.

Does this result prove my hardware is faulty?

No. It shows what the browser can observe. Repeat the test, compare another browser or device, and seek qualified support when the result matters.

Editorial and correction policyReport a problem with this test

Search